09
2020-01
Common Faults and Treatment of Power Cable
To improve the technical level of cable fault testing, different methods should be adopted for different fault properties, and new technologies and new equipment should be introduced continuously. At the same time, experience should be explored in new equipment and new functions should be developed. For example, the test technology of sending audio signals to cables and receiving signals at fault points is now used.
2020-01-09
07
2020-01
How can we really distinguish the good quality and secondary quality of cable and wire
Foot meters may be more difficult to detect in meters, because customers generally do not have the equipment to actually measure meters, and the same weighing method can be used to know whether the cable is full meters. Or it is also a good way to print the meter mark when the factory produces, but it should be noted that there is no way to print the meter mark for lines with a diameter of less than 5mm.
2020-01-07
02
2020-01
When a large number of cables are laid in groups, the current carrying capacity of the cables is reduced due to the mutual heating effect. Cables with large specifications sometimes need to be considered with two or more smaller parallel cables instead, because large cross-section cables will reduce the current carrying capacity per unit section due to skin effect and proximity effect.
2020-01-02
Service Hotline:
E-mail:
Address:
Yincun Economic Development Zone, Renqiu City, Cangzhou City, Hebei Province